OSRS Elemental Workshop II Quest Guide

Elemental Workshop II is the second quest in the series, where you delve deeper into the secrets of the mysterious workshop, solving puzzles to craft a mind helmet and mind shield.

Difficulty: Medium

Length: Short

General Questing recommendations

• Enable RuneLite Quest Helper in your RuneLite plugin section. 
• Hold your space bar to skip through NPC dialog, and use number keys for chatting dialog.

Item requirements for Elemental Workshop II

• Any pickaxe
• Hammer
• 8 coal
• 1 Battered key: obtained during Elemental Workshop I.

Recommendations for Elemental Workshop II

• 1 x Digsite teleport
• 1 x Camelot teleport

Enemies to defeat

2 Earth elementals (level 35)

Walkthrough for Elemental Workshop II

• Search the marked bookcase in the Exam Centre in the Digsite.

• Read the beaten book.
• Read the scroll

Bring: Battered Key, Any pickaxe, 8 coal, hammer.

• Go to the elemental workshop. Open the odd-looking wall and climb down the stairs to get to the workshop.

• Search the machinery in the north of the elemental workshop.

• Unlock the hatch in the middle of the workshop and climb down.

• Take crane schematics from the crate to the south. Reply 1.

• Climb back upstairs.
• Mine and kill 2 elemental rocks.
• Make 2 elemental bars from the 2 elemental ores and 8 coal using the furnace south.

• Make a claw by using the elemental bar on the anvil at the centre of the room. Only make 1 claw and keep the other elemental bar.

• Go back down to the deeper workshop.

• Pull the old lever.

• Use the claw on the crane

• Climb up the western stairs.

• Open the junction box.

• Click the pipes connected to each other with the yellow line.

• Search the various marked crates on the catwalk and below for 3 cogs and a pipe.

• Climb down the stairs and search the following crates until you find 3 cogs and 1 pipe.

• Climb back up the stairs.
• Use the pipe on the broken pipe to the north of the catwalk.

• Climb back down and place cogs on the pegs outside the wind tunnel, northeast.

• Bring: elemental metal
• Use the elemental bar on the jig cart. Right click the crane to find the jig cart since it is directly under it.

• Pull the southwest lever to lower the claw.
• Pull the southeast lever to rotate the claw.
• Pull the southwest lever to lower the claw into the lava.
• Pull the southwest lever to raise the claw out of the lava.
• Pull the southeast lever to rotate the claw back.
• Pull the southwest lever to lower the claw back into the jig.
• Pull the southwest lever to lower the claw once more.
• Pull the central lever to move the jig to the press.

• Pull the west lever to move the jig to the press.

• Pull the central lever to move the jig to the water tank.
• Pull the north lever to open the water tank.

• Turn the corkscrew.

• Turn the corkscrew again.
• Pull the north lever to close the tank.

• Turn the north-west water valve.

• Turn the northeast water valve.

• Turn the north-west water valve again.
• Pull the north lever again to open the water tank again.

• Turn the corkscrew.
• Turn the corkscrew once more.
• Pull the north lever again
• Pull the central lever to move the jig to the wind tunnel.

• Pull the east lever to start the wind tunnel.

• Pull the east lever again to stop the wind.
• Pull the central lever to move the jig back to the start.
• Pick up the primed bar from Jig cart.

Making a Mind Helm

Bring: 1 primed bar, hammer, and 1 Beaten book

• Go down from the priming room.

• Go south and use the primed bar on the extractor gun in the east room highlighted below.

• Operate the extractor hat to sit in the extractor chair.
• Take the mind bar from the extractor gun.

• Climb back upstairs.
• Climb up again.
• Smith at the workbench to make the mind helm.

Rewards from Elemental Workshop II

• 1 Quest Point
• 7,500 Crafting XP
• 7,500 Smithing XP
• A Mind Helmet
• Ability to craft and equip Mind Elemental Equipment